- The metal gear has high strength, small hum and is not easy to slip.
- Compact and portable.
- Accessories and large sewing machines are common.
1. Easy to operate, ready to use the line, flat and sharp, automatic position.
2. Suitable for many fabrics, the speed and the large sewing machine are equivalent. (Can be used on Denim, Silk, Crafts, Drapes)
3. Built-in alloy gears and durable wear-resistant chain.
1. It is easy to sew the hanging curtains, wall hangings, etc
2. Use this machine to sew your own handkerchief, apron, pillowcase, etc., and have some fun;
3. The clothes, skirts, etc. worn on the body are suddenly off-line, and the machine can be easily sewn without being taken off. When you are traveling or working, bring a special emergency;
4. Give a little guidance to children around the age of 12, and use this machine to sew small clothes, not only toys, but also a good companion for training children's working habits and training sewing skills.
Instructions for use:
1. Install 4 AA batteries (not included)
2. Standby: Hold the base with the right hand four fingers, the thumb is naturally placed on the top of the fuselage cover, and the machine is held smoothly.
3. Threading: follow the instructions in the product description
4. Place the cloth: Raise the pressure plate with your right index finger, place the fabric ready for sewing flat under the pressure plate, and gently put back the pressure plate to press the fabric.
5. Sewing operation: Hold the fabric with the left hand, gently press the right thumb gently, and the feeding mechanism will automatically send the object to the left. The right hand of the machine will gradually move to the right, and the left hand cloth will be stitched with the sewing rhythm. Move to the left until the end of sewing
6. This machine can automatically feed and adjust the tightness between the pins.
7. Change line group: If you change the large line group, you can connect the spare extension rod to the spool shaft, and insert the large line group. Then re-thread the thread and adjust the tension of the thread to make the sewing.
8. Change the needle: Loosen the fixing screw, take out the broken needle, and install the new needle.
- Rechargered by sunlightand store power for overnight lighting.
- Over 12 hours lighting time after one day charge.
- IP64 waterproof, heatproof and durable.
- Intelligent energy-saving.
Motion Angle: 120°
Motion Distance: 3M
Solar Power: 0.55W, 5.5V
Light Color: 5000K-5500K
Li-on Battery: 1200mAh, 3.7V
LED Power: 0.2W, 22-24/PCS
Lighting Mode: ❶OFF; ❷AUTO
Light Bead Type: COB+8LED( 2835SMD)
Motion Sensor Function:
It will auto light when people walk around 2 meters close and last 15s, then auto turn off when people leave.
This unique bug trapping solution uses an ultraviolet light on the 365nm-395nm wavelength to lure in insects of all kinds. They’re then either dried up by the powerful yet quiet fan or stuck on the built-in glue board. The result is a reduced insect population in areas up to 320-800 square feet.
With no chemicals, no odors, no zapper, and quiet operation, this bug trap is ideal to keep insects away from babies and small children in up to a 450 SQ FT space.
Just set up the insect trapper in a visible spot a few feet off the ground, plug it into the wall or USB power source, and let it do the rest.
Works well in kitchens, bedrooms, offices, garages, covered porches, and even areas with no electricity such as cabins or other enclosed places, just need to work with a power bank. It also doubles as a soothing nightlight!
Rated Power: 2.2 W
Output: 5 V / 1A
Light source: 360-400nm
Applicable areas: less than equal 20㎡ (Indoor)
-Strong suction that inhales the mosquito into the killer lamp.
-Contains no chemicals, safe and non-toxic.
-The UV lamp comes with a light-controlled sensor.
-Fine workmanship and good performance.
-Low power consumption, high efficiency.
-Convenient to use.
-Easy to remove and clean.
-Durable in use.
-Can be used in bedroom, meeting room, hotel, office, tent, and any other confined space places where needs killing mosquitoes.
100%brand new and high quality.
Made of high quality ABS material, more durable with long service life.
Brushless motor with high speed and low noise, stable and quiet 4 blade design, soft sound and low noise, wind and sound clear does not affect sleep
After precise operation, the cold air is released, and the temperature is accelerated by 3-10 °C. The private space can be kept cool for 25 °C for a long time.
Waterless state can be used as a fan, USB Charging, portable and convenient.
600m3/h high air volume, 1800ml/h large evaporation, 150ml integrated water tank for cool and humid for 8 hours
Size:approx.4*10cm Color: as the picture shows Material:Alkaline solvent Weight:107g
Rubber roller the best choice for DIY painter
Can paint beautiful pattern on the wall
Used with texture paint and emulsion paint
Can both apply with texture paint and water-based paint
This item is for one sleeve only without handle
- Use on all types of metal, wood, brick and masonry, foam, tile, ceramic, marble, pocelin, glass, stone, concrete, drywall and more.
- Bonds, seals and repairs
- Can be used on dry or wet surfaces… and even underwater!
- Can be applied to overhead surfaces
- Creates a rubberized, waterproof bond
- Mildew- and UV-resistant
- Won’t run or drip
- Won’t shrink or crack
- Once dry, it can be painted
- VOC compliant and low odor
- Cures in 24-48 hours
- Reaches maximum strength in 7 days
- If needed, reposition within the first 10 minutes
How to Use Flex Glue and Flex Glue Pro Cartridge
- First make sure all surfaces are clean and oil-free.
- Apply a generous amount to one side of the surface and apply firm, continuous pressure for 10-30 seconds. Slightly “shimmying” the surfaces can help create greater surface penetration and enhance the “instant grab” effect.
- If needed, reposition or tool within the first 10 minutes after application.
- Flex Glue cures in one to two days and becomes stronger over time.
- Note: Flex Glue Pro Cartridge requires a standard caulking gun, which is not included.
High carbon steel blades
Replaceable grafting blades
Trimming blades for grafting stock preparation
Create precise grafts with ease Ergonomic Features
Use for Propagation